Skip to content
Home
About Us
Resources
Profiles Metrics
Authors Directory
Institutions Directory
Top Authors
Top Institutions
Top Sponsors
AI Digest
Contact Us
Menu
Home
About Us
Resources
Profiles Metrics
Authors Directory
Institutions Directory
Top Authors
Top Institutions
Top Sponsors
AI Digest
Contact Us
Home
About Us
Resources
Profiles Metrics
Authors Directory
Institutions Directory
Top Authors
Top Institutions
Top Sponsors
AI Digest
Contact Us
Menu
Home
About Us
Resources
Profiles Metrics
Authors Directory
Institutions Directory
Top Authors
Top Institutions
Top Sponsors
AI Digest
Contact Us
Publication Details
AFRICAN RESEARCH NEXUS
SHINING A SPOTLIGHT ON AFRICAN RESEARCH
chemistry
Parametric analysis of the selective laser melting process
Applied Surface Science, Volume 253, No. 19, Year 2007
Notification
URL copied to clipboard!
Description
Selective laser sintering/melting (SLS/SLM) technology is used for manufacturing net-shaped objects from commercial Inox 904L powder with ≤20 μm particle size. Experiments were carried out on PHENIX-PM100 machine equipped with a 50 W cw fiber laser. Powder is layered by a roller over the surface of a 100 mm-diameter build cylinder. Optimal parameters of layer thickness and power input per unit speed for SLM were determined. It was shown that the greater the value of P/V ratio is, the larger is the remelted line (called as "vector"). Influence of the shifting of consecutive single vectors on the process of forming the first layer was studied. Different strategies for forming objects with less than 1 mm-sized inner structures were tested, as, for example, forming a 20 mm × 20 mm × 5 mm box with 140 μm-thick inner compartment walls. © 2007 Elsevier B.V. All rights reserved.
Authors & Co-Authors
Yadroitsev, Igor A.
France, Saint-etienne
Ecole Nationale D'ingénieurs de Saint-etienne
Smurov, I.
France, Saint-etienne
Ecole Nationale D'ingénieurs de Saint-etienne
Statistics
Citations: 578
Authors: 2
Affiliations: 1
Identifiers
Doi:
10.1016/j.apsusc.2007.02.088
ISSN:
01694332