Heat transfer inside a horizontal channel with an open trapezoidal enclosure subjected to a heat source of different lengths

The heat transfer phenomena inside a horizontal channel with an open trapezoidal enclosure subjected to a heat source of different lengths was investigated numerically in the present work. The heat source is considered as a local heating element of varying length, which is embedded at the bottom wall of the enclosure and maintained at a constant temperature. The air flow enters the channel horizontally at a constant cold temperature and a fixed velocity. The other walls of the enclosure and the channel are kept thermally insulated. The flow is assumed laminar, incompressible, and two-dimensional, whereas the fluid is considered Newtonian. The results are presented in the form of the contours of velocity, isotherms, and Nusselt numbers profiles for various values of the dimensionless heat source lengths (0.16 ≤ ε ≤ 1). while, both Prandtl and Reynolds numbers are kept constant at (Pr = 0.71) and (Re = 100), respectively. The results indicated that the distribution of the isotherms depends significantly on the length of the heat source. Also, it was noted that both the local and the average Nusselt numbers increase as the local heat source length increases. Moreover, the maximum temperature is located near the heat source location.