Fixation pull-out response measurement of bone screws and porous-surfaced posts

Screws and posts are used in various implant designs to contribute to the short- and long-term fixation stability of artificial joints. This study was undertaken to measure the detailed pull-out load-displacement response of bone screws, beaded porous coated posts, and smooth-surfaced posts in both proximal tibial cancellous bone and polyurethane material under monotonic static and repetitive cyclic loadings. The effect of a number of parameters such as insertion site on the proximal tibia, rate of displacement, insertion depth, outside diameter, drill size, repetitive loading, and boundary conditions were studied. Bone screws resisted significantly larger loads than posts of the same size. Smooth-surfaced posts demonstrated much larger (about twice) pull-out forces than beaded porous coated posts of the same size. The pull-out force in the proximal tibia was markedly larger at the medial region followed by the lateral region. The central region exhibited the least force. The resistance of screws and posts diminished with repetitive cyclic loads/displacements, especially when these were larger than 50% of their respective values at pull-out force evaluated under monotonic static loading conditions. The smooth-surfaced posts showed superior performance in maintaining their resistance in fatigue than did the porous coated posts and bone screws. The pull-out force was found to also depend on the pull-out material arrangement and boundary conditions. Pull-out results measured with a specific test design should not, therefore, be compared with those performed using different design configurations. © 1994.